Xiaomi Mi 9 SE Test Point EDL (9008) Mode

Xiaomi Mi 9 SE Test Point EDL (9008) Mode
Methods To Enter EDL Xiaomi Xiaomi Mi 9 SE EDL (9008) Mode Solution Mi 9 SE Flashing Remove FRP Lock

As you know on Xiaomi Mi 9 SE you will not able to enter to edl mode neither using edl USB Cable nor using the EDL command or options. So the question is how you can enter or boot to edl mode on Xiaomi Mi 9 SE ? and you are at right place to know and understand the complete process to use edl mode on MI 9SE. To use edl mode on this model, you just need to identify the EDL test point on the motherboard of the phone, if you find the correct test point then just connect these 2 points and you are done, and the phone will now detect on your computer. Now you can easily flash the firmware on your Mi phone and also you can remove mi account of the phone.

Xiaomi officially locked the bootloader by reasoned to improve the security system. Of course not all devices, only the latest. The impact, we can no longer flash device through fastboot. Another method to flash Xiaomi phones is through EDL Mode. But there are still many Xiaomi Mi 9 SE users who do not know how to get a device into EDL Mode, the reason is enter EDL Mode is more complicated than going to Fastboot. Sometimes special tools are needed.

What is EDL Mode?
EDL stands for Emergency Download Mode. This mode is like an emergency door to transfer the Android operating system (stock ROM) from computer to EMMC via processor when your device is boot loop, hard brick, or dead boot. The EDL Mode feature is available on Qualcomm Snapdragon devices.

READ MORE:-  Xiaomi Mi 8 Test Point Boot Xiaomi Mi 8 Into EDL 9008 Mode
Xiaomi Mi 9 SE Test Point EDL Mode:

A surface-mounted test point is basically a small wire loop designed as an attachment point for test probes on a circuit board containing surface-mount components. It is relatively small, about the same size as a standard chip capacitor package.

The location of test points on each type of phone will vary depending on the type of PCB. On Qualcomm phones generally provided test points to force the device into emergency download mode (9008).

Preparation:
Paper clip, Copper wire, Tweezers

Special screwdriver for opening hp

Mi PC Suite and Mi Flashtools (skip for the existing ones)

Rom Fastboot Xiaomi Mi 9 SE

USB cable RXiaomi Mi 9 SE

Operator SIM card

How To Enter Xiaomi Mi 9 SE EDL Mode:
Open Back Cover Xiaomi Mi 9 SE using SIM Used Operator and then use a screwdriver to open the bolt

When it is open, please remove the flexible battery label, then leave it for a few minutes and reconnect

You notice the two dots in the image below that are close together

Connect the other end of the USB cable to the computer and the other end of the USB cable to Xiaomi Mi 9 SE

Run device manage> note the USB port, what Xiaomi Mi 9 SE you are Qualcomm’s HS-USB Diagnostics 9008E, if yes you take Tweezers or copper wire then samsungkan to point Test Point that you have seen in the image just to change the Qualcomm HS- USB Diagnostics 9008

When it becomes a Qualcomm USB Port of HS-USB Diagnostics 9008 then you can Flashing Xiaomi Mi 9 SE you as usual

READ MORE:-  Vivo X23 Symphony Test Point EDL Mode - Remove User Lock
Wait for Flashingnya process is complete

Congratulations Xiaomi Mi 9 SE have recovered from the dead

Xiaomi Redmi 7A Test Point – EDL 9008 Mode

Xiaomi Redmi 7A Test Point – EDL 9008 Mode
 Redmi 7A Pinout Test Points Boot Into Edl 9008 Mode

If you happen to own an Android device running a Qualcomm processor chances are that your device supports Emergency Download Mode aka EDL Mode.

EDL mode is a Qualcomm enabled feature, that is useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm based device support it.

What Is Xiaomi Redmi 7A Test Point Or  EDL Mode?
If you are newbie user then probably EDL mode may be new word for you. But if you are involved in rooting and flashing firmware then absolutely not.

In short, EDL mode is also known as emergency mode for mobile. Technically all the Huawei devices come with EDL mode option. If you want to install or update your own Vivo Y95 phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Both methods have some limitations like Recovery ROM can be used only to update higher version and you can’t downgrade Huawei version.

Xiaomi Redmi 7A Test Post EDL 9008 Mode:

Find EDL MODE FOR Xiaomi Redmi 7A (2019)

Power off the device if possible.

Open back cover of dead Xiaomi Redmi 7A. [You may do Google to tear down Xiaomi Redmi 7A.

[Be careful at the time of removing back cover of the device and make sure you are not going to damage any hardware of the device]

Once you are able to remove back cover, disconnect the battery connector first. Battery not required for EDL mode.

Uses Of Xiaomi Redmi 7A Test Point
Install stock ROM on Xiaomi Redmi 7A
Flash Huawei Y9 without unlock the bootloader. Bootloader unlocking permission not required.
Recovery dead Huawei Y9 by flashing firmware.
Install stock ROM easily, if the device is not able to boot into fastboot mode or device stuck on Huawei Logo.

Redmi 7 EDL Mode PINOUT [Redmi 7 Test Points]

Redmi 7 EDL Mode PINOUT [Redmi 7 Test Points]
Redmi 7 Test Point For Flashing

Xiaomi Redmi 7 EDL Mode Ways

How To Boot Redmi 7  Into EDL 9008 Mode

This article shows you the way to bring Xiaomi Redmi 7 into Test Point mode which is formerly known as Emergency Download (EDL) mode. Despite it is an advanced method, some users still prefer to use this technique to bypass the need of officially unlocked bootloader.

There might be a situation when your device got bricked or in the bootloop state, but the bootloader has not been unlocked yet. Hence, this situation will force you to deliberately use the Test Point method. It would be impossible to unlock the boot loader since the device is bricked or is bootlooped.

What Is EDL Mode?

If you are newbie user then probably EDL mode may be a new word for you. But if you are involved in rooting and flashing firmware then absolutely not. In short, EDL mode is also known as an emergency mode for mobile. Technically all the Xiaomi devices come with EDL mode option. If you want to install or update your own Xiaomi or Redmi phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Both methods have some limitations like Recovery ROM can be used only to update higher version and you can’t downgrade Xiaomi version.

The Test Point method is indeed the best and most effective solution to overcome Xiaomi devices that experience Bootloop cases to Hard Brick in Locked Bootloader conditions very easily but with a very large percentage, it’s just that to be able to use this method you need to open the lid behind your Case Xiaomi Redmi Go to reach the point where this Test Point is located.

READ MORE:-  Nokia 2.1 TA-1084 Test Point Boot Into Edl 9008 Mode
Important! – For all of you, you know at this time you can’t flash firmware on Redmi 7 , because currently there is a lot of circulating Xiaomi Xiaomi Redmi Go with fake Bootloaders, so if your Bootloader is fake with indications.then you can’t Flash the original firmware for Xiaomi Redmi 7 then your device will be permanent brick, for that you first check what Codename Bootloader Redmi 7 is, original or fake.

Redmi 7 Test Point –  Boot Redmi 7 Into EDL 9008 Mode:

Power off the device if possible.
Open back cover of dead Xiaomi Redmi 7 . [You may do Google to tear down Redmi 7 at home]
[Be careful at the time of removing back cover of the device and make sure you are not going to damage any hardware of the device]

Once you are able to remove back cover, disconnect the battery connector first. Battery not required for EDL mode.
Now remove the black tape to visible the edl points of .
IMPORTANT: Most of the other Xiaomi phone’s edl mode points are visible but inRedmi Go it comes in hidden mode. Reasons are not disclosed by Xiaomi. But you can visible these test points by removing the black tape. After removing the black tape you can see two test points easily.

Now EDL mode or Xiaomi Redmi Go edl test points are in front of you. And you can use them to install firmware on Redmi 7 without unlocking the bootloader.